Toshiba B-EP700-WLAN-QM-R Installation Manual

Contents

EO2-380621/8TOSHIBA Wireless LAN KitB-EP700-WLAN-QM-R Installation ManualThank you for purchasing TOSHIBA wireless LAN kit, B-EP700-WLAN-QM-R.The B-EP700-WLAN-QM-R is an optional wireless LAN interface module for the B-EP2DL/EP4DL Series.The pictures used in this document are those of the B-EP4DL, but the installation procedure is common with theB-EP2DL unless otherwise noted.1. PACKING LISTThe following parts are supplied with the kit. Make sure you have all items shown below.Wireless LAN Module (1 pc.)Installation Manual(1 copy)Standard Label (1pc.)FPC CableNote: MAC address is printed on the wireless LAN module, as the following picture shows. Each wireless LANmodule has a unique MAC address. Although the MAC address can be checked by performing a parameterprint in the system mode, write down and keep it just in case that a parameter print cannot be performed or incase of repair.1. Follow all manual instructions. Failure to do so could create safety hazards such as fire or electrocution.• Manual instructions must be followed when installing option kits or adding cables to avoid systemfailures and to insure proper performance and operation.• Failure to follow manual instructions or any unauthorized modifications, substitution or change to thisproduct will void the limited product warranty.2. Turn the power off and remove the battery before installing the wireless LAN module.3. Be careful not to pinch your fingers or hands with the covers.WARNING!MACAddressFor B-EP4DL Series (1 pc.)For B-EP2DL Series (1pc.)Connected toWireless LAN moduleConnected toMain PCBPowerCable GroundWireConnected toMain PCBConnected toWireless LAN moduleShieldSheetFerrite CoreFerrite Core