Toshiba B-852 Owner's Manual

Also see for B-852 Advance: Specification sheet User manual Counter Reading Manual

2. PRINTER SETUP ENGLISH VERSION EO1-330552.9 Setting an Operating EnvironmentE2-332.9.6 Real Time Clock Setting(Cont.)(3) Low Battery Check SettingThis parameter is to choose whether to activate the low battery checkfunction or not.Press the [PAUSE] key to set.After selecting the low battery check, press the [PAUSE] key.(4) RTC Data Renewal Timing SettingThis parameter is to choose the RTC data renewal timing.Press the [PAUSE] key to set.After selecting the RTC data renewal timing, press the [PAUSE] key.The current date is displayed.Press the [FEED] and [RESTART] keys at the same time to return to the<8>RTC SET display.LOW BATT. CHECKLOW BATT. ON[RESTART][FEED]Low battery check isactivated.Low battery check is notactivated.LOW BATT. OFFRENEWALRENEWAL BATCH[RESTART][FEED]Batch print is possible. However, the sametime is printed on the all media issued in abatch because the real time clock data is readonly for the first media.A real time can be printed on each media.However, the printer needs to stop the motionbefore printing each media to read the real timeclock data.RENEWAL PAGENOTE:1. Be sure to load the battery and setthe low battery check function toON whenever the real time clockis used. If the battery is notloaded or the battery voltage islow, the real time clock data iserased at the power off time.2. When the low battery checkfunction is set to ON and if thebattery voltage is 1.9V or less, theprinter will result in a “LOWBATTERY” error and stop at thepower on time. As a restart isinvalidated in this case, holddown the [RESTART] key tocause the printer to enter<1>RESET mode, access the RealTime Clock setting mode, and setthe low battery function to OFF.DATE 06/03/01<8>RTC SET