Toshiba APG001Z Installation & Operation Manual

Also see for APOGEE FLN APG001Z: Instruction manual Function manual

Contents

contact information

Document Number 61746-000APG001Z Interface Card OptionAddendumThis document is an addendum to the APOGEE® FLN Option Unit Instruction Manual #E6581541.Because the VF-PS1 is built on the same platform as the Q9 ASD, it is recommended that this documentto be used in conjunction with the Toshiba Q9 ASD Installation and Operation Manual (P/N 59445).The Q9 ASD Installation and Operation Manual may be acquired from the Toshiba.com/ind web site(click Drives\Q9 LV Variable Torque HVAC\Manuals).For safety and application-specific reasons, some ASD installations will warrant that the operator not bein the vicinity during ASD operation or that the ASD control be executed remotely. The APG001Zinterface card is an optional circuit board that is mounted internal to the ASD and is used to facilitatecommunication with the host via the Floor Level Network (FLN) protocol.Using the APG001Z interface card the Q9 ASD may be monitored and controlled remotely. TheAPG001Z interface card has a built-in FLN communication driver and point database which allows theQ9 ASD to communicate over the APOGEE® network with other FLN devices.The APG001Z is simple to install and is ideally suited for use in fan and pump control applications, and insimilar equipment.Installation/Operation PrecautionsInstall the Q9 ASD securely in a well ventilated area that is out of direct sunlight. The control interfaceambient operating temperature is 14° – 104° F (-10° – 40° C).Installation instructions for the APG001Z interface card is described in the APOGEE® FLN InstructionManual #E6581541.• Installation is to be performed by Qualified Personnel only as defined in the Q9 ASD Installationand Operation Manual.• Setup parameters require that the Direct Access function be used to access the setup parameters andthat the Unknown Numbers feature of the ASD be set to Enabled.• Ensure that the Q9 ASD mounting location is easily accessible by the user.• Avoid installation in areas where vibration, heat, humidity, dust, metal particles, or high levels ofelectrical noise (EMI) are present.• Do not install the system where it may be exposed to flammable chemicals or gasses, water, solvents,or other fluids.• Turn the power on to the Q9 ASD only after securing the APG001Z and the ASD front cover.Contact InformationToshiba’s Customer Support Center can be contacted to obtain help in resolving any Adjustable SpeedDrive system problem that you may experience or to provide application information.The center is open from 8 a.m. to 5 p.m. (CST), Monday through Friday. The Support Center’s toll freenumber is US (800) 231-1412/Fax (713) 937-9349 — Canada (800) 527-1204.You may also contact Toshiba by writing to:Toshiba International Corporation13131 West Little York RoadHouston, Texas 77041-9990Attn: ASD Product Manager.