C-1SERVICE MODE LISTThis unit is provided with the following SERVICE MODES so you can repair, examine and adjust easily.To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit and on the remotecontrol for more than the standard time in the appropriate condition. (See below chart.)Releasing of V-CHIP PASSWORD.Initialization of factory TV data.NOTE: If you set factory initialization, the memories are resetsuch as the channel setting, and the POWER ON totalhours.Can be checked of the INITIAL DATA of MEMORY IC.Refer to the "WHEN REPLACING EEPROM (MEMORY) IC".Set Key OperationsVOL. DOWN(Minimum)RemoconKey0 2 sec.VOL. DOWN(Minimum) 1 2 sec.StandardTimeVOL. DOWN(Minimum) 6 2 sec.VOL. DOWN(Minimum) 9 2 sec.SetConditionTV modeTV modeALL modeTV modeDisplay of the Adjustment MENU on the screen.Refer to the "ELECTRICAL ADJUSTMENT" (On-Screen DisplayAdjustment).VOL. DOWN(Minimum) 8ALL modeCheck of the SUM DATA, POWER ON total hours, MICONVERSION and DIGITAL TV MICON FIRMWARE on the screen.Refer to the "WHEN REPLACING EEPROM (MEMORY) IC".2 sec.