IntroductionConnectingyour TVUsing theRemote ControlSetting upyour TVUsing the TV’sFeaturesAppendixIndex30Adjusting the color convergenceThis projection TV uses three separate TV tubes: red, green, and blue.The red, green, and blue images are projected onto the screen wherethey converge to form a full-color picture. You can see a clear pictureonly when the three images converge correctly. Convergence may driftover time or if you move the TV. If you can see clear images on yourTV screen, skip this procedure.This adjustment should be made only after the TV has been on for atleast 30 minutes.Automatically adjusting the color convergence usingTouchFocus™Press TOUCHFOCUS on the TV once. The TV will enter the autoconvergence mode and correctly adjust convergenceautomatically.TOUCH FOCUSTOUCH FOCUS F I N I SHEDHorizontalVerticalWhen the adjustment is complete, the normal picture willreappear.If the error message “Touch Focus Error” appears, retry theT OUCHF OCUS adjustment or adjust the convergence manually, asdescribed below.Manually adjusting the color convergenceTo check and adjust the color convergence manually:1. Press MENU, and then press x or • until the PICTURE menuappears.2. Press y or z to highlight CONVERGENCE.11234567891011121314151617181234567891011121314151617182 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 351 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35P CTURE ANTENNAIMODE SPORTSPREFERENCEFLESH TONE ONOFFCOOLCableClear DNRSVM HIGHCONVERGENCESAVE NEWCOLORTEMPERATUREB R GFOCUSTOUCHTV/VIDEOEXITMENU CHANNELVOLUMEMENUyzx •TOUCHF OCUSMENU x •zy