Toshiba 40SL412U Easy Setup Manual

Also see for 40SL412U: Owner's manual Specification sheet Energy guide

Contents

Chapter 6: Using the TV’s features32Note: See page 24 for details on configuringthe antenna input.• Turning off the TV will clear the History List.Setting the Channel Tuning ModeThis feature allows you to choose how tuning will behandled for analog and digital channels when the TVis in Antenna mode.Note: To use this feature, the Input Configurationmust be set to Antenna ( page 25).The channel tuning mode has three options.Mode DescriptionStandard Both analog and digital channels canbe tuned normallyAuto(default)Digital channels will have priority whenmanually entering a channel numberusing the Channel Number (0-9) on theremote control, analog channels canstill be tuned by / , if availableDigital Only digital channels can be tunedTo set the Channel Tuning Mode:1 From the Setup menu, highlight Installation andpress . A new set of Installation menu iconswill appear.2 Open the Terrestrial menu, highlight ChannelTuning Mode, and then press X to select yourdesired mode.Note:• The Channel Options windows as well asthe Channel Browser ANT/CABLE list will beupdated automatically when you change themode. Also, the History List will be cleared, butthe Favorites List will be saved.• Even if the Channel Tuning Mode is set toDigital, analog channel 3 will still be thedefault channel to prevent the initial casewhere no digital channels have been found inprior channel scans. (Channel Options will nothave anything listed until a scan is done.)Tuning to the next programmedchannelTo tune to the next programmed channel:Press or on the remote control or TV controlpanel.Note: This feature will not work unless youprogram channels into the TV’s channel memory( page 26).Tuning to a specific channel(programmed or unprogrammed)Tuning analog channels:Press the Channel Number (0–9) on the remotecontrol. For example, to select channel 125, press 1, 2,5, then .Tuning digital channels:Press the Channel Number (0–9) on the remotecontrol, followed by the dash ( ) button and thenthe sub-channel number. For example, to select digitalchannel 125-1, press 1, 2, 5, –, 1, then .Note: If a digital channel is not programmed—either through the automatic channel scan (page 26) or the Channel add function ( page27)—you will have to tune the RF channel usingthe Channel Number and dash ( ) on theremote control.Switching between two channelsusing Channel ReturnThe Channel Return feature allows you to switchbetween two channels without entering an actualchannel number each time.1 Select the first channel you want to view.2 Select a second channel using the ChannelNumber buttons (and the dash ( ) button ifselecting a digital channel).3 Press on the remote control. The previouschannel will display. Each time you press , theTV will switch back and forth between the last twochannels that were tuned.Note: If you press from a non-antennainput, the TV will return to the last-viewed input.(continued)