- 20 -Auto TuningAs new services are broadcast, it will be necessary toretune the television in order to view them.Auto Tuning will completely retune the television•and can be used to update the channel list. It isrecommended that Auto Tuning is run periodicallyto ensure that all new services are added. All currentchannels and settings, i.e. locked channels, willbe lost.Press• MENU button on the remote control and selectInstall and Retune by using Left or Right button.Press OK button and the following menu screenwill be displayed.Select• Automatic Channel Scan by using Up orDown button and press OK button. Automatic ChannelScan options will be displayed.You can select optionsby using Up or Down and OK buttons.Auto Channel Scan Menu OperationDigital: Searches and stores aerial DVB stations.Analogue: Searches and stores analogue stations.Full: Searches and stores both analogue and aerialDVB stationsWhenever you select an automatic search type and•press OK button, a confirmation screen will appearon the screen. To start installation process, selectYes, to cancel select No by using Left or Rightand OK button.After auto channel scan type is set and selected•and confirmed, installation process will start andprogress bar will move along. Press MENU buttonto cancel process. In such a case, located channelsare not stored. The television will start to search forall available stations. You must allow the televisionto complete the search.Auto Tuning40BL702B_MB65_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10075901.indd 2040BL702B_MB65_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10075901.indd 20 21.01.2012 18:06:2221.01.2012 18:06:22