Toshiba 3LCD Quick Reference Card

Contents

press menu

12OPERATIONS3LCD DATA PROJECTORQUICK REFERENCE CARDProjecting a Picture• Connect external equipmentsuch as a computer orvideo tape player.• Connect the power cord tothe projector.Press ON/STANDBY.Both the ON and LAMP indications light upin green.Turn on the connected equipmentand put it in playback mode.5Press INPUT to select theinput source.Video: VIDEO input pictureRGB: RGB input pictureCAMERA: Camera input pictureAdjust the picture size andfocus.Zoom ring: Adjust the picture size.Focus ring: Focus the picture.4312Turning Off the Power After UsePut the connected equipmentin the stop mode.Press ON/STANDBY.An instruction message appears.Press ON/STANDBY again.(Power turns off and then the lamp goes off.)After confirming the exhaust fanstops, unplug the power cord.3For more informations about usage and operations, see the owner’s manual.“Camera” function is equipped only with the model which has a document imaging camera model.4ON/STANDBYINPUTON/STANDBYON/STANDBY4) Open the camera head.5) Turn the camera head.6) Pull up the light.7) Turn the light.1Projecting Images with the Document Imaging Camera34Press ARM LIGHT.The light turns on.Place a document onto oraround the projector, and turnthe camera head to directionof the document.Press CAMERA.The appeared image is a projected onethrough the camera.Move the camera head toadjust the size of the picture,and focus on the picture byturning the focusing ring onthe camera head.25After using, return the arm to the original position in thereverse order.1) Raise up the arm.2) Stretch the arm.3) Turn the arm.ARM LIGHTCAMERAUp : to reduce.Down : To enlarge.Focusing ringN : NearF : Far

/ 2

Related manuals for Toshiba 3LCD