ControllingHDMI®CECplaybackdevicesWith your TV's remote control, you can control theconnected HDMI ®CEC playback device (DVD player,etc.) you are watching.Available remote control key functions:Before using these key functions, set the MODESELECT switch on the remote control to TV.[_ Begins playback.Stops playback.Pauses the picture during play or recordmode.[_K] Skips forward.Skips backward.Fast-forwards.[_ Rewinds / reverses.• • • • Navigates contents menu, etc.(.@ Enters contents menu, etc.E_i! Closes the menu.RED,GREEN, Controls various operationsYELLOW,BLUENote: These functions depend on the connected devices.HDMI ®CEC Player Control menu functions:1 Press _STC_to open the Quick menu.2 Select HDMI-CEC Player Control. Press _.3 Press • or • to select the item you want to controland press :o_.Power Turns the selected device on and off.Root Menu Accesses the selected device's top menu.Contents Accesses the contents list when you pressMenu _.Setup Menu Accesses the device's setup menu.Note:• These functions depend on the connected devices.• The HDMI-CEC Player Control item is not available underthese conditions:- A non-HDMI input is selected.- The Enable HDMI-CEC Control item is set to Off.- The connectedHDMI _ CEC device is nota playback orrecording device.HDMI® CECControlinputsourceselectionIf an HDMI ®CEC device with HDMI switchingcapability (e.g. an amplifier) is connected to the HDMIinput, you can select another HDMI ®CEC device that isconnected to the master HDMI device.Use NN+]on the remote control or the control panel (_#r'p. 41).47