33Chapter 6: Using the Monitor’s featuresAdjusting the audioMuting the soundPress W to partially reduce (1/2 MUTE) or turn off (MUTE)the sound. Each time you press W, the mute mode will changein the following order:If the closed caption mode is set to Off when you select“MUTE” mode, the closed caption feature is automaticallyactivated. To mute the audio without automatically activatingthe closed caption feature, use Z to set the volume to 0. See“Using the closed caption mode” on page 32 for moreinformation on closed caption modes.Adjusting the audio qualityYou can adjust the audio quality by adjusting the bass, treble,and balance.To adjust the audio quality:1 Press Y and open the Audio menu.2 Press b or B to highlight the item you want to adjust(Bass, Treble, or Balance).3 Press C or c to adjust the level.• C makes the bass or treble weaker or increases thebalance in the left channel.• c makes the bass or treble stronger or increases thebalance in the right channel.Using the SRS WOW ™ surround soundfeatureWOW ™ is a special combination of SRS Labs audiotechnologies (SRS 3D, FOCUS, and TruBass) that creates athrilling surround sound experience with deep, rich bass fromstereo sound sources. Your monitor’s audio will sound fuller,richer, and wider.To adjust the WOW ™ settings:1 Press Y and open the Audio menu.2 Highlight WOW and press T.3 Press b or B to highlight the WOW feature you want toadjust, and then press C or c to adjust the item.• SRS 3D — To turn the surround sound effect On orOff.Note: If the broadcast is monaural, the SRS 3D effectwill not work.• FOCUS — To turn the vocal emphasis effect On orOff.• TruBass — To select the desired bass expansion level(Off, Low, or High).WOW, SRS and l symbol are trademarks of SRS Labs, Inc.WOW technology is incorporated under license from SRS Labs, Inc.Volume1/2 Mute MuteStableSoundWOWBalanceTrebleBassAudioMENU Back Watch TVEXIT50500OnENTERSRS 3DMENU Back Watch TVEXITOnFOCUS OnWOWTruBass High