14Connectingyour TVConnecting an audio systemThis connection allows you to use external speakers with an externalaudio amplifier to adjust the sound level.To control the audio:Turn on the TV and the stereo amplifier.Turn off the TV’s built-in speakers (see “Turning off the built-inspeakers” on page 38).Note: To hear sound when using an external audio amplifier, thevolume of both the TV and the amplifier must be set to a reasonablelistening level.You will need:• one pair of standard audio cablesLINE INL RBack panel of TVAmplifierAV Amplifier with built-in digital surroundCenter SpeakerFrontSpeaker(Left)FrontSpeaker(Right)SubwooferSurround Speaker(Left)SurroundSpeaker (Right)TVYou will need:• one coaxial digital cable• Six sets of speaker cablesThe COAXIAL DIGITAL AUDIO OUT jack outputs digital audio only during digital broadcasts with digital audio. To hear analogbroadcast audio, you also must connect analog audio cables from the L/R ANALOG AUDIO jacks to the receiver’s inputs.Consult the owner’s manual for your receiver to determine the best way to switch between the analog and digital signals.This connection allows you to use an audio amplifier with built-indigital surround and external speakers.See “Selecting the digital output format” on page 39.Connecting an A/V amplifier with built-in digital surroundNote:Refer to the Owner’s manual of the audioamplifier as well.Back panel of TVJ3W60321A_En_p07-14 27/2/06, 9:54 AM14
