6CAUTION: Always place the TV on the floor or a sturdy,level, stable surface that can support the weight ofthe unit. To secure the TV, use a sturdy strap fromthe hook(s) on the rear of the TV to a wall stud, pillar,or other immovable structure. Make sure the strap istight, secure, and parallel to the floor.4) Follow the instructions provided with your wallbracket. Before proceeding, make sure theappropriate bracket(s) are attached to the wall andthe back of the TV as described in the instructionsprovided with the wall bracket.5) After attaching the appropriate bracket(s) to thewall and the back of the TV, remove the pedestalstand from the TV as described on below.6) VESA Mounting PatternTV Size Hole Pattern(HxV) Screw Size24” 100x100 mm M432’’ 200x200 mm M640’’ 200x200 mm M6(unit in mm)Removing the Pedestal Stand1) Carefully lay the front of the unit face down on aflat, cushioned surface such as a quilt or blanket.Leave the stand protruding over the edge of thesurface.Note: Extreme care should always be usedwhen removing the pedestal stand to avoiddamage to the LCD panel.2) Remove the four screws shown in the rightdiagram. This will allow removal of the pedestalstand.3) Once you have removed all the pedestal standscrews, remove the pedestal stand from the TV.32” TVFour screwsVESA Mounting PatternHookSturdy strap(as short as possible)Four screws24” TV VESA Mounting Pattern40” TVFour screwsVESA Mounting PatternHookSturdy strap(as short as possible)Four screws
