5Getting startedThe following accessories are included with TV:24”Owner’s Manual Base Stand × 1 Remote Control × 1AAA Battery × 2 Screw × 2 Power Cord × 1P-clip x 132” / 40” / 43”Owner’s Manual Base Stand × 2 Remote Control × 1AAA Battery × 2 Screw × 4 AV Cable × 1P-clip x 1Installing the StandCAUTION• Be sure to disconnect the A/C power cord before installing a standor Wall-Mount brackets.• The LED display is very fragile, and must be protected at all timeswhen installing the base stand. Be sure that no hard or sharpobject, or anything that could scratch or damage the LED display,comes into contact with it. DO NOT exert pressure on the front ofthe TV at any time because the screen could crack.1. Carefully place your TV face-down on a soft, flat surface toprevent damage to the TV or scratching to the screen.2. Remove the stand from the accessory bag and then insert thestand into the bottom slot of the TV.3. Secure the Base Stand to the TV with the screw in accessorytightly.Accessories ListInstalling the Stand or Wall mount bracketBase StandScrews:M3x1224”(24L2900/24L2900EA/24L2900EE/24L2900EV)NOTE: The accessories may be different from the list abovedue to different models, countries/regions, please refer to the actualaccessory bag.Base StandBase StandScrews:M4x25Screws:M4x2532”(32L2900/32L2900EA/32L2900EE/32L2900EV)32”(32S2900/32S2900EA/32S2900EE/32S2900EV)40”(40S2900/40S2900EA/40S2900EE/40S2900EV)43”(43S2900/43S2900EA/43S2900EE/43S2900EV)Base Stand Screws:M4x25Base Stand Screws:M4x25