Speed Dial –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––60 Strata DK Digital Telephoneä To clear a telephone number on a Station Speed Dial buttonä Repeat the previous procedure on Page 59, skipping Step 3.ä To program one-touch telephone number dialingä Repeat the previous procedure on Page 59, except for Step 3. For Step 3, press [PDN] +CO line access code before the telephone number. See “CO Line Access Codes” on Page107.ä To make a call using a Speed Dial button or access codeTo store longerdialing strings, see“Speed Dial NumberLinking” on Page 64.To insert a pause orflash signal in thenumber, see “SpeedDial Pause and FlashStorage” on Page 63.4. Press . The number is stored.1. Access a CO line.If your "# button hasbeen programmed toautomatically do this,skip this step.2. Press "#...or " # .Then enter Speed Dialaccess code (seeTable 15 on Page109).The system dials the telephone number assigned to the button/code. If your "# button is “one-touch,” as explained above,skip Step 1.
