Menu
Toro Workman 07378 Installation Instructions Manual
    |
Form No. 3438-470 Rev AFour-Post Rollover Protection System KitWorkman® HD/HDX/HDX-D Utility VehicleModel No. 07378—Serial No. 290000001 and UpInstallation InstructionsLoose PartsUse the chart below to verify that all parts have been shipped.Description Qty. UseNo parts required – Prepare the machine.Left ROPS post 1Right ROPS post 1Crossbar 1Floor support 2Flange-head bolt (1/2 x 3-1/2 inches) 4Flange-head bolt (3/8 x 2-1/2 inches) 4Flange-head bolt (3/8 x 1 inch) 4Flange-head bolt (1/2 x 1-1/4 inches) 2Locknut (3/8 inch) 8Locknut (1/2 inch) 6Install the four-post rollover protection system (ROPS).Preparing the Machine1. Park the machine on a level surface.2. Engage the parking brake.3. Shut off the engine and remove the key.g038494Figure 1© 2020—The Toro® Company8111 Lyndale Avenue SouthBloomington, MN 55420Register at www.Toro.com. Original Instructions (EN)Printed in the USAAll Rights Reserved *3438-470* A |
Related manuals for Toro Workman 07378
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved