Toro Reelmaster 5200-D Operator's Manual

Contents

251234576Figure 241. Traction speed limiter2. Reel control light3. Speedometer4. Brake pedals5. Parking brake latch6. Locking pin7. Key switchEngine Coolant Temperature WarningLightThe light (Fig. 25) illuminates and engine shuts down whencoolant reaches a dangerously high temperature.Throttle ControlMove control (Fig. 25) forward to increase engine speed,rearward to decrease speed.12 54 37 68 9Figure 251. Lower mow/raise controllever2. Fuel gauge3. Engine coolanttemperature gauge4. Engine oil pressurewarning light5. Engine coolanttemperature warning light6. Glow plug indicator light7. Charge indicator8. Throttle control9. Enable/disable switchFuel GaugeThe fuel gauge (Fig. 25) shows amount of fuel in tank.Lower Mow/Raise Control LeverThe lever (Fig. 25) raises and lowers the cutting units andalso starts and stops the reels.Glow Plug Indicator LightWhen lit (Fig. 25), indicates a control system problem.Light blinks when glow plugs are preheating.Engine Oil Pressure Warning LightThis light (Fig. 25) indicates dangerously low engine oilpressure.Charge IndicatorThe charge indicator (Fig. 25) illuminates when systemcharging circuit malfunctions.Enable/Disable SwitchThe enable/disable switch (Fig. 25) is used in conjunctionwith lower mow / raise control lever (Joystick) to operatereels. Reels can be raised but not lowered when in midposition.Backlap SwitchThe backlap switch (Fig. 26) is used in conjunction withlower mow / raise control lever for backlapping operation.Refer to Cutting Unit Maintenance, Backlapping.1Figure 261. Backlap switch