Toro Pro Sneak 360 Installation Instructions Manual

Also see for Pro Sneak 360: Operator's manual Operator's manual

Form No. 3386-754 Rev B22in Reel CarrierPro Sneak 360 and 365 Vibratory PlowModel No. 25419Model No. 25419EInstallation InstructionsInstallationLoose PartsUse the chart below to verify that all parts have been shipped.Procedure Description Qty. UseReel-carrier arms 2Reel-carrier pipe 1Stop collar 4Set screw (3/8 inch) 4Clevis pin 41Cotter pin 4Install the reel carrier.ROPS-cable-guide bracket 1U-bolt (4 inches) 1Locknut (3/8 inch) 2Spacers 4Hood-cable-guide bracket (model 25400only) 1Nut (5/16) (model 25400 only) 2Bolt (5/16 x 3/4 inch) (model 25400 only) 2Bent hood-cable-guide bracket (model25403 only) 12Bolt (5/16 x 1 inch) (model 25403 only) 2Install the cable guides.© 2014—The Toro® Company8111 Lyndale Avenue SouthBloomington, MN 55420Register at www.Toro.com. Original Instructions (EN)Printed in the USA.All Rights Reserved *3386-754* B

/ 4

Related manuals for Toro Pro Sneak 360