Toro HoverPro 450 Operator's Manual

Also see for HoverPro 450: Operator's manual Operator's manual Operator's manual Installation instructions Installation instructions

Form No. 3394-825 Rev BHoverPro 450 MachineModel No. 02612—Serial No. 315000001 and UpOperator's ManualIntroductionRead this information carefully to learn how to operateand maintain your product properly and to avoidinjury and product damage. You are responsible foroperating the product properly and safely. Keep thismanual for future reference.You may contact Toro directly at www.Toro.comfor product safety and operation training materials,accessory information, help finding a dealer, or toregister your product.Whenever you need service, genuine Toro parts, oradditional information, contact an Authorized ServiceDealer or Toro Customer Service and have the modeland serial numbers of your product ready. Figure 1identifies the location of the model and serial numberson the product.g017365Figure 11. Model and serial number plateWrite the product model and serial numbers in thespace below:Model No.Serial No.This manual identifies potential hazards and hassafety messages identified by the safety alert symbol(Figure 2), which signals a hazard that may causeserious injury or death if you do not follow therecommended precautions.g000502Figure 21. Safety alert symbolThis manual uses 2 words to highlight information.Important calls attention to special mechanicalinformation and Note emphasizes general informationworthy of special attention.This product complies with all relevant Europeandirectives. For details, see the separate productspecific Declaration of Conformity (DOC) sheet.Net Torque: The gross or net torque of this enginewas laboratory rated by the engine manufacturer inaccordance with the Society of Automotive Engineers(SAE) J1349. As configured to meet safety, emission,and operating requirements, the actual engine torqueon this class of machine will be significantly lower.Go to www.Toro.com to view specifications on yourmachine model.Do not tamper with the engine controls or alter thegovernor speed; doing so may create an unsafecondition resulting in personal injury.ContentsIntroduction ............................................................... 1Safety ....................................................................... 2General Machine Safety..................................... 2Sound Pressure.................................................. 4Sound Power...................................................... 4Vibration............................................................. 4Safety and Instructional Decals .......................... 5Setup ........................................................................ 61 Assembling the Handle.................................... 62 Installing the Footstop...................................... 73 Filling the Engine with Oil................................. 7Product Overview ..................................................... 8© 2017—The Toro® Company8111 Lyndale Avenue SouthBloomington, MN 55420Register at www.Toro.com. Original Instructions (EN)Printed in the UKAll Rights Reserved *3394-825* B