Toro Groundsmaster 4000-D Service Manual

Also see for Groundsmaster 4000-D: Installation instructions Service manual Service manual Service manual Service manual

Contents

Groundsmaster 4000--D/4010--DPage 5 -- 10Electrical SystemMain Menu ScreenThe main menu screen can be accessed from the Info-Center main information by pressing and releasing themenu/back button (left button) on the display. Once tothe main menu screen (Fig. 12), navigation to the five (5)different menu items can occur. Pressing the move tomenu item button (center button) allows a differentmenu item to be highlighted. Selection of the highlighteditem is completed by pressing the choose item button(right button).The main menu items include faults, service, diagnos-tics, settings and about. These menu items are de-scribed below.To return to the main information screen from the mainmenu screen, press the back button (left button).1. Main menu2. Menu items3. Move to menu items4. Choose menu item5. Back buttonFigure 1213453 4Main MenuFaultsServiceDiagnostics25Faults ScreenThe faults screen (Fig. 13) will list all machine electricalfaults that have occurred since the faults were lastcleared from the InfoCenter. The faults will be identifiedby a fault number and when the fault occurred. Faultsthat might occur on the machine are listed in FaultCodes in the Troubleshooting section of this chapter.After entry of the PIN code, the InfoCenter fault log canbe cleared by selecting the clear system faults menuitem. The cleared faults will be removed from the Info-Center list but will be retained in the TEC controllermemory.If a fault occurs during machine use, there may be achange in machine functionality due to the fault. Shouldthere be machine operation issues due to a fault, a firststep to remedy the issue would be to disengage the cut-ting decks, release the traction pedal, turn the ignitionswitch OFF and allow all machine functions to stop.Then, attempt to restart the machine to see if operationhas returned to normal. Some faults will be reset duringthe restart and will then allow normal function. If a faultcontinues to occur, further system evaluation and pos-sible component repair or replacement will be neces-sary.To return to the main menu screen from the faultsscreen, press the back button (left button).1. Fault menu2. Fault items3. Move to menu items4. Choose menu item5. Back buttonFigure 13135 3 4Faults#39Clear System Faults--57.3 Ago25