Menu
Toro Flex-Force Power System 51833T Manual
Also see for Flex-Force Power System 51833: Operator's manualOperator's manualOperator's manual
                                                                |
6. Tighten the wing nut to secure the wheel.Replacing the Skid PlateIf the skid plate becomes worn or damaged, replaceit; contact your authorized Toro distributor.1. Ensure that the battery is removed from themachine.2. Remove the 2 screws securing the skid plate tothe edger (Figure 12).g344651Figure 161. Skid plate 2. Screws3. Replace the skid plate and secure it using the 2screws removed previously.StorageImportant: Store the tool, battery pack, andcharger only in temperatures that are within theappropriate range; refer to Specifications (page11).Important: If you are storing the battery pack forthe off-season, remove the battery pack from thetool and charge the battery pack until 2 or 3 LEDindicators turn green on the battery. Do not storea fully charged or fully depleted battery. When youare ready to use the tool again, charge the batterypack until the left indicator light turns green onthe charger or all 4 LED indicators turn green onthe battery.• Disconnect the product from the power supply(i.e., remove the plug from the power supply or thebattery pack) and check for damage after use.• Do not store the tool with the battery pack installed.• Clean all foreign material from the product.• When not in use, store the tool, battery pack, andbattery charger out of the reach of children.• Keep the tool, battery pack, and battery chargeraway from corrosive agents, such as gardenchemicals and de-icing salts.• To reduce the risk of serious personal injury, donot store the battery pack outside or in vehicles.• Store the tool, battery pack, and battery chargerin an enclosed clean, dry area.Preparing the Battery Packfor RecyclingImportant: Upon removal, cover the terminals ofthe battery pack with heavy-duty adhesive tape.Do not attempt to destroy or disassemble thebattery pack or remove any of its components.Lithium-ion battery packs labeled with theCall2Recycle seal can be recycled at anyparticipating retailer or battery recyclingfacility in the Call2Recycle program (USand Canada only). To locate a participatingretailer or facility closest to you, please call1-800-822-8837 or visit www.call2recycle.org.If you cannot locate a participating retailer orfacility nearby, or if your rechargeable batteryis not labeled with the Call2Recycle seal,please contact your local municipality for moreinformation on how to responsibly recycle thebattery. If you are located outside of the USand Canada, please contact your authorizedToro distributor.17 |
Related manuals for Toro Flex-Force Power System 51833
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved