Toro EVOLUTION Series Installation Manual

Also see for EVOLUTION Series: Manual Manual User guide Quick start guide Manual

Upgrade from Version 2.0 and Earlier:A video demonstrating the firmwareupgrade procedure is available at:www.toro.com/evolution(US & Canada)www.toroevolution.com (int’l).Open the EVOLUTION controller. If backup battery is present,remove it.Insert USB drive into controller USB slot.Remove power from the controller.• Unplug AC (preferred) OR• Remove ribbon cableController will automatically recognize USBdrive and upgrade the controller.Cycle power when prompted. Remove power from the controller. ...return power to the controller.Firmware file is updated.A status bar will indicate progress.Controller resets and is updated! Go toADVANCED-->FIRMWARE-->VERSIONand confirm firmware update to 2.13.Remove USB drive if desired.Congratulations!Your EVOLUTION controller is nowready to work with Smart Connect.1 2 3469 10 111257 8At the same time:Hold finger on DOWN buttonAND......return power to the controller.• Plug AC power back in OR• Reattach ribbon cable

/ 3

Related manuals for Toro EVOLUTION Series