Toro Dingo 323 Operator's Manual

Also see for 22318: Service manual Operator's manual Operator's manual Operator's manual

9SetupNote: Determine the left and right side of the machine from the normal operating position.Loose PartsNote: Use the chart below to verify that all parts have been shipped.DESCRIPTION QTY. USESpeed selector lever assembly 1 Install the speed selector leverKey 2 Start engineHydraulic oil filter 1 Break-in oil changeDrain hose 1 Drain the engine oilInstalling the Valve Lever1. Remove and discard the nut securing the bolt andwasher to the speed selector lever.2. Secure the lever to the speed selector valve using thebolt and washer as illustrated in Figure 2.2m–82041Figure 21. Speed selector lever 2. Speed selector valveCharging the BatteryCALIFORNIAProposition 65 WarningBattery posts, terminals, and related accessoriescontain lead and lead compounds, chemicalsknown to the State of California to cause cancerand reproductive harm. Wash hands afterhandling.WarningBattery terminals or metal tools could shortagainst metal components, causing sparks. Sparkscan cause the battery gasses to explode, resultingin personal injury.• When removing or installing the battery, do notallow the battery terminals to touch any metalparts of the traction unit.• Do not allow metal tools to short between thebattery terminals and metal parts of thetraction unit.Warning1. Park the traction unit on a level surface, raise theloader arms, and install the cylinder locks; refer toUsing the Cylinder Locks, page 17.2. Stop the engine and remove the key.