Toro CM Series Operator's Manual

Also see for 68004: Operator's manual Operator's manual

WARNINGCALIFORNIAProposition 65 WarningThis product contains a chemical or chemicalsknown to the State of California to cause cancer,birth defects, or reproductive harm.The engine exhaust from this productcontains chemicals known to the State ofCalifornia to cause cancer, birth defects,or other reproductive harm.Use of this product may cause exposure tochemicals known to the State of Californiato cause cancer, birth defects, or otherreproductive harm.This spark ignition system complies with Canadian ICES-002.Because in some areas there are local, state, or federalregulations requiring that a spark arrester be used on theengine of this machine, a spark arrester is available asan option. If you require a spark arrester, contact yourAuthorized Toro Service Dealer.Genuine Toro spark arresters are approved by the USDAForestry Service.It is a violation of California Public Resource CodeSection 4442 or 4443 to use or operate the engine on anyforest-covered, brush-covered, or grass-covered land unlessthe engine is equipped with a spark arrester, as defined inSection 4442, maintained in effective working order or theengine is constructed, equipped, and maintained for theprevention of fire.The enclosedEngine Owner's Manual is supplied forinformation regarding the US Environmental ProtectionAgency (EPA) and the California Emission ControlRegulation of emission systems, maintenance, andwarranty. Replacements may be ordered through theengine manufacturer.IntroductionThis machine is designed to mix concrete, plaster, fireproofingmaterial, grout, and other small-grained concrete products.The machine can be towed behind a vehicle equipped witha hitch appropriate for the type of tow pole your machinehas (ball, pintle, or pin hitch).Read this information carefully to learn how to operate andmaintain your product properly and to avoid injury andproduct damage. You are responsible for operating theproduct properly and safely.You may contact Toro directly at www.Toro.com for productsafety and operation training materials, accessory information,help finding a dealer, or to register your product.Whenever you need service, genuine Toro parts, or additionalinformation, contact an Authorized Service Dealer or ToroCustomer Service and have the model and serial numbers ofyour product ready. Write the numbers in the space provided.1 G019545Figure 1Side-Dump Models1. Model and serial number locationG0199131Figure 2End-Dump Models1. Model and serial number locationModel No.Serial No.This manual identifies potential hazards and has safetymessages identified by the safety-alert symbol (Figure 3),which signals a hazard that may cause serious injury or deathif you do not follow the recommended precautions.© 2016—The Toro® Company8111 Lyndale Avenue SouthBloomington, MN 55420 2Contact us at www.Toro.com.Printed in the USAAll Rights Reserved