Toro 68048 Operator's Manual

Also see for 68048: Original instructions

Product Overview1234g0195195241g020316Figure 31. Handle-adjustment knob 4. Dyna-Clutch lever2. Throttle handle 5. Tilt-adjustment knob(Models 68048 and 68050only)3. ProPitch handle (Models68049 and 68051 only)123457g0215606Figure 41. Lifting point 5. Sediment cup2. Fuel-tank cap 6. Recoil-starter handle3. Choke lever 7. Engine On/Off switch4. Fuel valveControlsRecoil-starter HandlePull the recoil-starter handle to start the engine (Figure 4).Fuel ValveClose the fuel valve when transporting or storing the machine(Figure 4).Choke LeverUse the choke lever (Figure 4) to start a cold engine. Beforepulling the recoil-starter handle, move the choke lever to theclosed position. Once the engine is running, move the chokelever to the open position.Note: A warm engine requires little or no choking.Engine On/Off SwitchThe On/Off switch (Figure 4) allows the operator of themachine to start and stop the engine. This switch is locatedon the front of the engine. Rotate the On/Off switch to theOn position to start and run the engine. Rotate the On/Offswitch to the Off position to stop the engine.6

/ 24

This manual is suitable for:

68048 68049 68050 68051 PT-36 PT-36PP PT-46 PT-46PP

Toro 68048 Operator's Manual

Product

Learn More

Legal