Toro 38567 Operator's Manual

Contents

Form No. 3365-599 Rev CCCR™ 6053 R Quick Clear SnowthrowerModel No. 38567—Serial No. 311000001 and UpModel No. 38569—Serial No. 311000001 and UpOperator's ManualIntroductionThis machine is intended to be used by residentialhomeowners or professional, hired operators. Itis designed primarily for removing snow frompaved surfaces, such as driveways and sidewalks,and other surfaces for traffic on residential orcommercial properties. It is not designed forremoving materials other than snow, nor is itdesigned for clearing off gravel surfaces.Read this information carefully to learn how to operateand maintain your machine properly and to avoid injuryand machine damage. You are responsible for operatingthe machine properly and safely.You may contact Toro directly at www.Toro.com formachine and accessory information, help finding adealer, or to register your machine.Whenever you need service, genuine Toro parts,or additional information, contact an AuthorizedService Dealer or Toro Customer Service and havethe model and serial numbers of your machine ready.Figure 1 identifies the location of the model and serialnumbers on the machine. Write the numbers in thespace provided.Figure 11. Model and serial number locationModel No.Serial No.This manual identifies potential hazards and has safetymessages identified by the safety alert symbol (Figure 2),which signals a hazard that may cause serious injuryor death if you do not follow the recommendedprecautions.Figure 21. Safety alert symbolThis manual uses 2 words to highlight information.Important calls attention to special mechanicalinformation and Note emphasizes general informationworthy of special attention.SafetyRead and understand the contents of this manualbefore you start the engine.This is the safety alert symbol. It is used to alertyou to potential personal injury hazards. Obey allsafety messages that follow this symbol to avoidpossible injury or death.Improperly using or maintaining this machinecould result in injury or death. To reduce thispotential, comply with the following safetyinstructions.Training• Read, understand, and follow all instructions on themachine and in the manual(s) before operating thismachine. Be thoroughly familiar with the controlsand the proper use of the machine. Know how tostop the machine and disengage the controls quickly.© 2010—The Toro® Company8111 Lyndale Avenue SouthBloomington, MN 55420Register at www.Toro.com. Original Instructions (EN)Printed in the USAAll Rights Reserved