Toro 25430 Operator's Manual

Also see for RT600: Operator's manual Operator's manual Operator's manual Operator's manual Installation instructions

Contents

Figure 171. Control bar 2. Seat leverSeat Pivot ControlTo rotate the seat, pull the seat lever up and rotate the seatto the desired position.Seat BeltWARNINGOperating the machine without the rolloverprotection system (ROPS) securely in place canresult in serious injury or death if the machine rollsover.Ensure that the roll bar is securely in place.Always wear a seat belt with the ROPS in place.Ensure that the operator seat is properly securedto the machine.Note: Regulations in some localities require that seat belts onconstruction machines be 76 mm (3 inch) wide. Check withlocal authorities regarding the requirements for seat belts.• To fasten the seat belt, insert the tab end into the leftbuckle.Note: Ensure that the tab end and the buckle aresecurely fastened.• To release the seat belt, push the button on the buckle.Battery-disconnect SwitchThe battery-disconnect switch is located behind the rightengine cowl (Figure 18); use it to electrically disconnect thebattery from the machine.Figure 181. Battery On position 2. Battery Off position• Rotate the battery disconnect clockwise to the Onposition.• Rotate the battery disconnect counterclockwise to theOff position.SpecificationsNote: Specifications and design are subject to changewithout notice.Basic Machine Dimensions and Weight DataWheel base 149.8 cm (59.0 in)Overall height (to the top ofthe ROPS)243.8 cm (96.0 in)Overall width (at the tires) 170.2 cm (67.0 in)Minimum ground clearance 30.5 cm (12.0 in)Turning radius (2-wheelsteering)464.8 cm (183 in)Turning radius (4-wheelsteering)294.6 cm (116 in)Weight (without attachments) 2,494 kg (5,500 lb)Attachments/AccessoriesA selection of Toro approved attachments and accessories isavailable for use with the machine to enhance and expandits capabilities. Contact your Authorized Service Dealer orDistributor or go to www.Toro.com for a list of all approvedattachments and accessories.21