44Using the % Adjust FunctionADJ WATER AMOUNT STA 010% = No ChangeADJ WATER AMOUNT STA 01+05% = More WaterADJUSTWater Amount1. Turn the Function dial to % ADJUST. The Water Amountadjustment option is selected by default.1. Turn the Upper Line knob to select the station number.% Adjust by Water Amount2. The unadjusted water amount value is 0%. Turn the Lower Line knobright to increase, or left to decrease the value in 5% increments.Maximum adjustment range is +25 to –50%.The % Adjust function allows you to make minor changes in overallstation irrigation rate by increasing or decreasing the watering programvalues proportionally by percentage. Adjustments can be made in5% increments by Water Amount (station run time and cycles per day),and by Day Frequency/Maximum Allowable Depletion (MAD).Note: Both adjustment methods can be applied to each active station,however, DF/MAD is only available to stations operating in theAutomated by WeatherTRAK mode.Important: A small percentage adjustment can result ina significant change in irrigation rate. Always adjust in 5 or 10%increments, then monitor the condition of the landscape for7 to 10 days prior to making additional adjustments.!2. To adjust by Water Amount factors, continue below. To adjust byDay Frequency/MAD, continue on page 43.
