g195541Figure 41. Operator’s Manual tube 4. Slotted-head bolt (2)2. Clamp (2) 5. Cable tie3. Throttle cable 6. Locknut (2)3. Slide the clamps onto the Operator’s Manualtube and install it on top of the lower handleusing 2 slotted-head bolts and 2 locknuts (Figure4).2Connecting the NegativeBattery CableNo Parts RequiredProcedure1. Remove the plastic cap from the negativebattery terminal.2. Connect the negative battery cable to thenegative (-) battery post using the bolt and nutattached to the cable (Figure 5).g195546Figure 51. Negative battery cable 3. Battery2. Bolt and nut7