Toro 21864 Operator's Manual

Also see for Flex-Force Power System 60V MAX: Operator's manual Operator's manual Operator's manual Operator's manual Manual

Adjusting the Self-PropelDriveFor Self-Propel-Drive Models OnlyWhenever you install a new self-propel cable or ifthe self-propel drive is out of adjustment, adjust theself-propel drive.1. Turn the adjustment nut counterclockwise toloosen the cable adjustment (Figure 22).g269307Figure 221. Handle (left side) 4. Turn the nut clockwise totighten the adjustment.2. Adjustment nut 5. Turn the nutcounterclockwise toloosen the adjustment.3. Self-propel-drive cable2. Adjust the tension on the cable (Figure 22) bypulling it back or pushing it forward and holdingthat position.Note: Push the cable toward the motor toincrease the traction; pull the cable away fromthe motor to decrease the traction.3. Turn the adjustment nut clockwise to tighten thecable adjustment.Note: Tighten the nut firmly with a socket orwrench.Preparing the Battery Packfor RecyclingImportant: Upon removal, cover the terminals ofthe battery pack with heavy-duty adhesive tape.Do not attempt to destroy or disassemble thebattery pack or remove any of its components.Contact your local municipality or your authorized Torodistributor for more information on how to responsiblyrecycle the battery.21