Toro 135-6822 Installation Instructions Manual

Form No. 3432-421 Rev ACE Conversion Kit20in Turf SeederModel No. 135-6822Installation InstructionsThis product complies with all relevant Europeandirectives. For details, please see the Declaration ofIncorporation (DOI) at the back of this publicationSafetySafety Alert SymbolThis Safety Alert Symbol (Figure 1) is used both inthis manual and on the machine to identify importantsafety messages which must be followed to avoidaccidents.This symbol means: ATTENTION! BECOME ALERT!YOUR SAFETY IS INVOLVED!g000502Figure 1Safety Alert SymbolThe safety alert symbol appears above informationwhich alerts you to unsafe actions or situations andwill be followed by the word DANGER, WARNING, orCAUTION.DANGER: Indicates an imminently hazardoussituation which, if not avoided, Will result in death orserious injury.WARNING: Indicates a potentially hazardous situationwhich, if not avoided, Could result in death or seriousinjury.CAUTION: Indicates a potentially hazardous situationwhich, if not avoided, May result in minor or moderateinjury.This manual uses two other words to highlightinformation. Important calls attention to specialmechanical information and Note emphasizes generalinformation worthy of special attention.Maintenance SafetyNote: Determine the left and right sides of themachine from the normal operating position.WARNINGIf you leave the wire on the spark plug,someone could accidentally start the engine.Accidental starting of the engine couldseriously injure you or other bystanders.Disconnect the wire from the spark plugbefore you do any maintenance. Set the wireaside so that it does not accidentally contactthe spark plug.CAUTIONChemicals are hazardous and can causepersonal injury.• Read the directions on the chemical labelsbefore handling the chemicals and followall manufacturer recommendations andprecautions.• Keep chemicals away from your skin.Should contact occur, wash the affectedarea thoroughly with soap and clean water.• Wear goggles, gloves, and any otherprotective equipment recommended by thechemical manufacturer.Important: Make sure that you wear theappropriate Personal Protective Equipment (PPE)and follow all safety precautions as stated inthe Operator’s manual for your machine, beforestarting these instructions.Note: Park the unit on a level surface and shut offthe engine. Make sure that all moving parts havestopped, engage the parking brake, and remove thespark plug wire. Allow machine to cool before startingthese installation instructions.© 2019—The Toro® Company8111 Lyndale Avenue SouthBloomington, MN 55420Register at www.Toro.com. Original Instructions (EN)Printed in the USAAll Rights Reserved *3432-421* A