Toro 08759 Operator's Manual

Also see for 08759: Operator's manual

Contents

• Perform only those maintenance instructionsdescribed in this manual. If major repairs areever needed or assistance is desired, contact anAuthorized Toro Distributor.• To reduce a potential fire hazard, keep theengine free of excessive grease, grass, leaves,and accumulations of dirt. Never wash a warmengine or any electrical parts with water.• Be sure that the machine is in safe operatingcondition by keeping nuts, bolts, and screwstight. Check the fan shaft bearing mountingbolts and nuts frequently to be sure that theyare tightened to specification.• Make sure that all hydraulic line connectors aretight and all hydraulic hoses and lines are ingood condition before applying pressure to thesystem.• Keep your body and hands away from pin holeleaks in hydraulic lines that eject high pressurehydraulic fluid. Use cardboard or paper to findhydraulic leaks. Hydraulic fluid escaping underpressure can penetrate skin and cause injury.Fluid accidentally injected into the skin mustbe surgically removed within a few hours bya doctor familiar with this form of injury organgrene may result.• Before disconnecting or performing any workon the hydraulic system, all pressure in thesystem must be relieved by stopping the engineand lowering the blower to the ground.• If the engine must be running to perform amaintenance adjustment, keep hands, feet,clothing, and other parts of the body awayfrom the fan and other moving parts.• Do not overspeed the engine by changing thegovernor settings. To be sure of safety andaccuracy, have an Authorized Toro Distributorcheck the maximum engine speed with atachometer.• The engine must be shut off before checkingthe oil or adding oil to the crankcase.• To ensure optimum performance and safety,always purchase genuine Toro replacementparts and accessories to keep the machineall Toro. Never use “will-fit” replacementparts and accessories made by othermanufacturers. Look for the Toro logoto ensure genuineness. Using unapprovedreplacement parts and accessories could voidthe warranty.Sound PressureThis unit has an equivalent continuous A-weightedsound pressure level at the operator ear of 92 dBA,based on measurements of identical machines perEN 11094 and EN 836Sound PowerThis unit has a guaranteed sound power level of108 dBA, based on measurements of identicalmachines per EN 11094.VibrationThis unit does not exceed a hand/arm vibrationlevel of 2.50 m/s2, based on measurementsof identical machines per EN 1033. This unitdoes not exceed a whole body vibration level of0.50 m/s2, based on measurements of identicalmachines per EN 1032.4