1.38 1.38Transmission Neutral Indicator LightIlluminates when the travel control pedal is in theneutral position and the ignition key is turned toposition ‘I’.Note: The parking brake must be engaged for thetransmission neutral indicator light to illuminate.Cutterdeck Drive Switch Indicator LightIlluminates when the cutterdeck drive switch is inthe ‘off’ position and the ignition key is turned toposition ‘I’.Parking Brake Indicator LightIlluminates when the parking brake is engaged andthe ignition key is turned to position ‘I’.Hydraulic Return Filter Indicator LightIlluminates when the return filter element is blocked.Note: The engine must be running for the hydrau-lic return filter indicator light to illuminate. Theindicator light may illuminate briefly when thehydraulic oil is cold.Hydraulic Transmission Filter IndicatorLightIlluminates when the transmission filter element isblocked.Note: The engine must be running for the hydrau-lic return filter indicator light to illuminate. Theindicator light may illuminate briefly when thehydraulic oil is cold.Transmission System ‘Work’ Mode Indica-tor LightIlluminates when the transmission system ‘work’mode is selected and the ignition key turned toposition ‘I’.OPERATING THE MOWERNP