Tascam US-2x2 Owner's Manual

Also see for us-2x2: Reference manual Owner's manual Reference manual Owner's manual Owner's manual

Contents

Tascam US-2x2 Owner's Manual Manual pdf 11 page image

TASCAM US-2x2/US-4x4 11Making various settings8 WindowsFrom “All Apps” (All Programs), select “TASCAM US-2x2& US-4x4 Software Mixer” under TASCAM.8 Mac OSSelect “TASCAM US-2x2 & US-4x4 Settings Panel” fromthe Applications folder and launch it to open themixer panel on the computer display.Windows Software Mixer12345Mac Settings Panel1 Direct Monitor Settings Input 1-2Set the monitoring signal for the IN1/IN2 jacks toMono or Stereo.2 Direct Monitor Settings Input 3-4 (US-4x4only)Set the monitoring signal for the IN3/IN4 jacks toMono or Stereo.3 Audio Input On/OffTurn input on/off for each channel separately.4 Line Outputs 1-2Select the signals to be output from the LINEOUT (BALANCED) 1/2 and PHONES ( 1 and 2jacks on US-4x4) jacks.OptionsMonitor: The signals input from all the inputconnectors and the signals sent from thecomputer by USB are mixed by the mixer andoutput.Computer 1-2: Only the signals sent from thecomputer by USB are output.Computer 3-4: Only the signals sent from thecomputer by USB are output. (US-4x4 only)5 Line Outputs 3-4 (US-4x4 only)Select the signals to be output from the LINEOUT (BALANCED) 3/4.OptionsMonitor: The signals input from all the inputconnectors and the signals sent from thecomputer by USB are mixed by the mixer andoutput.Computer 1-2: Only the signals sent from thecomputer by USB are output.Computer 3-4: Only the signals sent from thecomputer by USB are output.For details about other settings, see “Settings Panelscreen” in “6 – Using the Settings Panel” of theReference Manual.Connecting other equipmentExamples of connections to a US-4x4 (front)Bass GuitarGuitar HeadphonesVocal mic Vocal micExamples of connections to a US-4x4 (back)Powered speakers withbalanced connections Drum machine ComputerUSB-BplugCAUTION• Before making connections, turn this unit and allequipment to be connected off (standby).• The phantom power affects both US-2x2 inputchannels (all four US-4x4 input channels) simul-taneously. Do not turn phantom power on whenconnecting a mic that does not require phantompower.• Set the phantom power switch to +48V onlywhen using a condenser microphone that