Tascam CD-R624M Installation Manual

Contents

Tascam CD-R624M Installation Manual Manual pdf 9 page image

2) Make sure the CDR media is on the list of approved media ofthis drive. We have tested many types of CDR media, and theresults are posted on our web site at http://www.tascam.com.The list is kept on the site so it may be kept as up to date aspossible. For convenience, we haveincluded the list on your CD-R624Msoftware CD. Keep in mind that it willbe updated from time to time on ourweb site.3) While the CD-Recorder is recording, make sure the CDR driveis not agitated. (If you write as vigorously as I do, even writingthe jewel case insert on the same table as the CD-Recorder ison could shake the unit enough.) CD Recording requiresmuch more stability than reading. When reading a CD, playerscan take several passes at the data stream if the tracking is lost.However, CD-Recorders do not have this luxury. They arerecording the information on the CD, and need to do soprecisely the first time.The system is testing too slow for 6x recording speeds. -Chances are there is more processing going on than just your CDauthoring software.1) If your computer has a lot of applications running in thebackground, this can substantially slow the efficiency of yoursystem. (Common culprits are likely to be anti-virus software,screen savers, or advanced network applications.) These canbe temporarily disabled to dedicate more processinghorsepower to the CD authoring software.2) In recent years, large disk drives have become more and moreaffordable, but often the drives many stores advertise are quiteslow. If the drive is too slow, then you’ll have to try optimizingyour drive.SFX Machine doesn’t show up in Peak LE. - The Plug-Insfolder of Peak LE is probably not set-up properly.1) Make sure you installed SFX Machine Lite. (SFX Machine Litehas its own installer.)2) Make sure SFX Machine Lite is in the Plug-Ins folder inside theapplication for Peak LE. Also, be sure you do not have multiplecopies of Peak LE on your computer. SFX Machine Lite mustbe in the Plug-Ins folder that is in the same folder as the currentPeak LE application.3) Peak LE can only support up to 3 plug-ins at a time. If there aremore than 3 plug-ins in the Plug-Ins folder, then some of theothers must be removed, and Peak LE must be restarted.Technical SupportIf you are still experiencing problems with the unit after reading theprevious troubleshooting section, you can check for more up to dateFAQ documents at TASCAM’s web site at:http://www.tascam.comor contact TASCAM Technical Support at:(323) 726-0303custser@teac.com

/ 9

Related manuals for Tascam CD-R624M