Talk To Me Technologies wego A Quick Reference

Also see for wego A: Quick reference Quick reference Quick reference Quick reference User guide

Talk To Me Technologies wego A Quick Reference Manual pdf 1 page image

Quick ReferenceTMAwegoTTMT Switch Interface - GoTalk NOW PLUSNeed help? support@talktometechnologies.com877.392.2299 Option 3 talktometechnologies.comNote: If these instructions do not match your current vocabulary set, please contactTechnical Support for assistance.WCD-0920Setup InstructionsTurn on the TTMT Switch Interface, using the on/off switchlocated on the side of the interface box. You will see a redpower light to indicate the interface is turned on.Ensure the Switch Interface is connected to the wego viaBluetooth.1. Exit the communication software. If you are unable to exitthe software, you may be in Guided Access.2. Open the iOS Settings then select Bluetooth. EnsureBluetooth is toggled On. Under My Devices, you shouldsee TTMT Switch listed as Connected. If not, tap on“TTMT Switch” to connect. You may see a pop-upBluetooth Pairing Request, if so, press Pair.3. Once the Switch Interface is connected via Bluetooth, youcan plug in your switches and begin setup. Connect yourSwitch or Switches to the TTMT Switch Interface.The Switch Interface can be used with one or two switches.For single-switch scanning, plug your switch to Switch Port 1.For two-step scanning, plug in both switches, with your“chooser” in Port 1 and your “mover” switch in Port 2.Setup with GoTalk NOW PLUS1. Return to the communication app, GoTalk NOW PLUS.Open Settings and Scroll to Scanning.2. Select Scanning Device Type > Space and Enter Switch.3. Determine Scanning Mode.a. For single-switch scanning, toggle on Auto Scan.b. For two-switch scanning, toggle off Auto Scan.4. Select Grouping Style (row, column, etc), Speed, Repeat,etc. as preferred.5. Press Done to close Settings and return to Player Mode.

/ 2

Related manuals for Talk To Me Technologies wego A