aIMPORTANT SAFETY INSTRUCTIONS1 Read these instructions.2 Keep these instructions.3 Heed all warnings.4 Follow all instructions.5 Do not use this apparatus near water.6 Clean only with dry cloth.7 Do not block any ventilation openings.Install in accordance with themanufacturer's instructions.8 Do not install near any heat sources suchas radiators, heat registers, stoves, or otherapparatus (including amplifiers) thatproduce heat.9 Do not defeat the safety purpose of thepolarized or grounding-type plug. Apolarized plug has two blades with onewider than the other. A grounding type plughas two blades and a third groundingprong. The wide blade or the third prongare provided for your safety. If the providedplug does not fit into your outlet, consult anelectrician for replacement of the obsoleteoutlet.10 Protect the power cord from being walkedon or pinched particularly at plugs,convenience receptacles, and the pointwhere they exit from the apparatus.11 Only use attachments/accessoriesspecified by the manufacturer.12 Unplug this apparatus during lightningstorms or when unused for long periods oftime.13 Refer all servicing to qualified servicepersonnel. Servicing is required when theapparatus has been damaged in any way,such as power-supply cord or plug isdamaged, liquid has been spilled or objectshave fallen into the apparatus, theapparatus has been exposed to rain ormoisture, does not operate normally, or hasbeen dropped.• This equipment should be installed near thesocket outlet and disconnection of thedevice should be easily accessible.• Do not install in a confined space.• Do not open the unit - risk of electric shockinside.Caution:You are cautioned that any change ormodifications not expressly approved in thismanual could void your authority to operate thisequipment.Service• There are no user-serviceable parts inside.• All service must be performed by qualifiedpersonnel.Warning!• To reduce the risk of fire or electric shock,do not expose this apparatus to rain ormoisture.• This apparatus must be earthed.• Use a three wire grounding type line cordlike the one supplied with the product.• Be advised that different operating voltagesrequire the use of different types of linecord and attachment plugs.• Check the voltage in your area and use thecorrect type. See table below:Voltage Line plug according to standard110-125V UL817 and CSA C22.2 no 42.220-230V CEE 7 page VII, SR section107-2-D1/IEC 83 page C4.240V BS 1363 of 1984.Specification for 13A fusedplugs and switched andunswitched socket outlets.The lightning flash with an arrowheadsymbol within an equilateral triangle, isintended to alert the user to thepresence of uninsulated "dangerous voltage"within the product's enclosure that may be ofsufficient magnitude to constitute a risk ofelectric shock to persons.The exclamation point within anequilateral triangle is intended to alertthe user to the presence of importantoperating and maintenance (servicing)instructions in the literature accompanying theproduct.