Sony XC-ES50 Brochure

Also see for XC-EI30: Specifications User guide Technical manual Brochure & specs Technical manual

Contents

CONNECTION DIAGRAMLO-77ERKExtension rings kitVCL-08YMVCL-12YMVCL-16Y-MVCL-25Y-MTripod adaptorVCT-333ICCXC-12P02NCamera cableC-mount lens* 1 Only VCL-50Y-M is applicable to the XC-EU50/EU50CE.* 2 The XC-ES50L/ES50LCE cannot be attached to the VCT-333I.* 3 HD/VD is not available at C.SYNC.* 1 VCL-50Y-MACVIDEO OUTHD/VDDCVIDEO OUTHD/VD* 3TRIGWENCamera adaptorDC-700/700CE(New EIAJ standard 12-pin connector)CCXC-12P05NCCXC-12P10NCCXC-12P25NXC-ES50/ES50CEXC-ES50L/ES50LCE* 2XC-ES51/ES51CEXC-ES30/ES30CEXC-EI50/EI50CEXC-EI30/EI30CEXC-EU50/EU50CEJunction boxJB-77(Trigger input terminal is not available.)DIMENSIONS & REAR PANELUnit: mm29126.5C0.52229292910 6.5C0.5C0.55.532CCDXC-ES50L29 ±0.2 12 ±0.16.516.5 ±0.252.5 ±0.23029 ±0.215 ±0.3 (36.6)28.8 ±0.3 (7.8)16 ±0.2 (20.8)85.5φ27.54-M3 depth 512-pin multi-connector124 312-pin multi-connectorNo. Switch name Factory-setting mode1 Dip switch 1-4: Shutter speed OFFDip switch 5: FRAME/FIELD FRAMEDip switch 6-8: External trigger Normalshutter mode, restart/reset modeDip switch 9: Gamma ON/OFF OFFDip switch 0: GAIN Manual2 HD/VD signal input/output switch EXT3 Control volume for Manual GAIN Twelve o'clock position4 75 Ω termination switch ONPIN No. External sync (HD/VD) Internal sync (HD/VD)1 GND GND2 +12V DC +12V DC3 GND GND4 Video output Video output5 GND GND6 External HD input Internal HD output7 External VD input*1 Internal VD output8 GND GND9 – –10 WEN output*2 WEN output*211 TRIG input TRIG input12 GND GNDShutter speed/Modesetting DIP switch*1 An input VD signal is required when using restart, reset mode.*2 WEN output works only when in external trigger shutter mode.● Factory setting mode of rear panelXC-ES50/ES50CE/ES51/ES51CE/ES30/ES30CEXC-EI50/EI50CE/EI30/EI30CE/EU50/EU50CEXC-ES50L/ES50LCE

/ 4

Related manuals for Sony XC-EI30