Menu
Sony XC-7500 Operating Instructions Manual
                                                                                            |
59a) An internal switch change is necessary to output HD and VD signals.For details, see “Location and Setting of the Internal Switches on the SG-235 Board” on page 86.External sync modeHD/VD VS Restart/reset1 Ground Ground Ground Ground2 +12 V DC +12 V DC +12 V DC +12 V DC3 Video output 1 (ground) Video output 1 (ground) Video output 1 (ground) Video output 1 (ground)4 Video output 1 (signal) Video output 1 (signal) Video output 1 (signal) Video output 1 (signal)5 HD input (ground) ——— HD input (ground) HD output (ground)6 HD input (signal) ——— HD input (signal) HD outputa) (signal)7 VD input (signal) VS input (signal) VD input (signal) VD outputa) (signal)8 Video output 2 (ground) Video output 2 (ground) Video output 2 (ground) Video output 2 (ground)9 Video output 2 (signal) Video output 2 (signal) Video output 2 (signal) Video output 2 (signal)10 Ground Ground ——— Ground11 +12 V DC +12 V DC ——— +12 V DC12 VD input (ground) VS input (ground) Reset (ground) VD output (ground)Camera sync outputPin no.912 851012113 74 68 DC IN/SYNC (DC power input/sync signal I/O)connector (12-pin)Connect a CCXC-12P05S camera cable to this connector,the +12 V DC power supply, and the video signal outputfrom the camera module.When a sync signal generator outputting external syncsignals is connected to this connector, the camera module issynchronized with the external sync signals.The pin configuration of this connector is as follows: |
Related manuals for Sony XC-7500
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved