24 The Screen MenuAspectVPL-SW630C/SW620C/SW630/SW620*1: If you select “Normal,” the image isprojected in the same resolution as theinput signal without changing the aspectratio of the original image.*2: If you select “Full2,” the image is projectedto fit the projected image size, regardlessof the aspect ratio of the image.*3: If you adjust the projected image positionusing an image with 16:9 aspect ratio andthen switch the input source to 4:3 image,the top and bottom edge of the image maybe hidden. In this a case, select “Full3.”*4: Depending on the input signal, theprojected image may be projected asillustrated below. In this a case, select“16:9.”*5: Depending on the input signal, the imagemay be projected as illustrated below. Inthis a case, select “Zoom.”Input signal Recommendedsetting value andprojected imageComputer signal4:3 Full1*1 *2 *316:9 Full1*1 *2 *316:10 Full1 *3Video signal4:3 4:3 *4 *516:9 16:9