321 Turn on the camera.b Note• Connect the AC adapter to the camera if one is supplied with the camera.2 Set the camera to playback mode.• Playback operation differs among cameras. For most cameras, switch the power/mode button toplayback, PLAY/EDIT or VTR mode to play video. For details, refer to the operating instructions ofyour camera.• When you copy HD (High Definition) video taken in HDV format on a tape by connectingHandycam ® with DV (i.LINK) cable, set the [i.LINK CONV] setting on the Handycam ® to [ON].This will down-convert videos recorded in HD (High Definition) to SD (Standard Definition) quality.3 Connect the camera to this unit.b Notes• You cannot copy videos by connecting a MICROMV or HDV format camera via DV (i.LINK) cable.• The following models do not support for recording with a DV (i.LINK) cable. Use an audio/video cable.– DCR-VX700/VX1000, HDR-FX1/FX7/FX1000DV (i.LINK) cableDV connectorDV IN connectorDV (i.LINK) cable (not supplied)