Sony VAIO VGN-AW100 Series User Manual

Contents

57n NUsing Your VAIO ComputerTo connect in STB mode1 Connect one end of a TV coaxial cable (1) (not supplied) to your cable service access (wall outlet) (2). Connect the otherend to the VHF/UHF input port on the back panel of your set-top box (STB) (3).2 Connect a second TV coaxial cable (4) (not supplied) to the VHF/UHF output port on the set-top box (STB) (3). Connectthe other end to the single-connection end of a splitter device (5) (not supplied).3 Connect a third TV coaxial cable (6) (not supplied) to the double-connection end of the splitter device (5).4 Connect the other end to the MMCX antenna converter cable (7) (supplied).5 Connect the MMCX antenna converter cable (7) to the VHF/UHF input port (8) on the computer.6 Connect a fourth TV coaxial cable (9) (not supplied) to the double-connection end of the splitter device (5). Connect theother end to the VHF/UHF input port (10) on your TV monitor or display.