Sony UPX-C200 Operating Instructions Manual

Also see for UPX-C200: Brochure & specs Brochure & specs Operating instructions Operating instructions

Setting the Bluetooth Functions 29Canceling addition/registration of theprinterTo cancel addition/registration of the printer, thefollowing two methods are available:• In Step 7, while “Searching New Printers . . .” isdisplayed, press ENTER of the control button.Searching is interrupted, and the display returns toBluetooth Menu.• In Step 9, select CANCEL instead of ADD, then pressENTER of the control button. Addition/registration ofthe printer is canceled.If a printer cannot be added/registeredPrinters cannot be added/registered in the followingcases:• Three printers have been already connected.t Delete an unnecessary printer.• The passkey of the printer is different from that of thecamera.t Set the same passkey as that of the camera.Removing a Printer1 Display the Setup display.For details, see “Displaying the Setup Display” onpage 14.2 Press v or V of the control button to selectBluetooth.3 Press ENTER of the control button.The Bluetooth Menu display appears.4 Press v or V of the control button to selectREMOVE PRINTER.The PRINTER LIST appears.5 Press v or V of the control button to select a printerto be removed.6 Press b or B of the control button to selectREMOVE.7 Press ENTER of the control button.The printer selected in Step 5 is removed, and itsprinter name and Bluetooth address are deleted.8 Press ENTER of the control button again.The display returns to Bluetooth Menu.To cancel removing the printerIn Step 6, select CANCEL instead of REMOVE, thenpress ENTER of the control button. Deletion of theprinter is canceled, and the display returns to BluetoothMenu.