Sony SWR10 Troubleshooting Manual

Also see for SmartBand SWR10: User guide Manual User guide

To reconnect your SmartBand using NFC1 Android™ device: Make sure that the NFC function is turned on and that thescreen is active and unlocked.2 Place the Android™ device over your SmartBand so that the NFC detectionarea of each device touches the other. appears briefly in the status barand permanently in the Notification panel when a connection with theSmartBand is active.You can drag down the status bar to open the Notification panel and get quick access tothe SmartBand application and the Lifelog application.I don't receive alarm notifications• The alarm notification function only works when your SmartBand is connected toan Xperia™ device.My sleep data wasn't logged• Check the mode of your SmartBand and make sure that it is in night mode.To check which mode your SmartBand is in• Briefly press the power key. The notification lights switch between one litand two lit lights when your SmartBand is in night mode, and when it is inday mode, the notification lights illuminate one by one, then all lights goout.• Switch your SmartBand to night mode if it is in day mode.To switch between day mode and night mode• Press and hold down the power key for two seconds.Data about my activities is notupdated in the Lifelog application• Make sure that you wear the SmartBand on your dominant wrist when collectingdata.• Make sure that you have an active Internet connection to ensure the successfulsynchronisation of data between your SmartBand and the Lifelog application onyour Android™ device. Also, remember that your SmartBand only stores data forup to two weeks.I don't receive any location data• Make sure that your Android™ device has an active Internet connection.• Make sure that you have enabled location services, GPS satellites and Google'slocation service on your Android™ device.5

/ 5

Related manuals for Sony SmartBand SWR10