51USEnjoying Sound Effects1 Select “FM” or “AM” from themenu, then press .2 Select “Select Preset”, then press.3 Select the preset number whichyou want to name, then press ,then press OPTIONS.4 Select “Name Input”, then press.5 Press V/v repeatedly to select acharacter, then press b.You can move the input positionbackward and forward by pressingB/b. You can enter a name up to 8characters.6 Repeat step 5 to input a characterone by one, then press .The name you entered is registered.Some letters that can be displayed on the TVscreen cannot be displayed on the display panel.Selecting the soundfield1 Select “Sound Effects” from thehome menu, then press .2 Select “Sound Field”, then press.3 Select the sound field you want.You can select the sound field you want bypressing SOUND FIELD +/– repeatedly on theremote control. You can also use A.F.D./2CH,Movie or Music on the receiver.Auto Format Direct (A.F.D.) mode: Thismode allows you to listen to higher fidelitysound and select the decoding mode forlistening to a 2 channel stereo sound asmulti channel sound.2 channel sound mode: You can switchthe output sound to 2 channel soundregardless of the recording formats of thesoftware you are using, the playbackequipment connected, or the sound fieldsettings of the receiver.x A.F.D. Auto (A.F.D. AUTO)Presets the sound as it was recorded/encoded without adding any surroundeffects.However, for USA and Canada models,this receiver will generate a low frequencysignal for output to the subwoofer whenthere is no LFE signals.Naming preset stations(Name Input)NoteEnjoying Sound EffectsTipAuto Format Direct(A.F.D.)/2 channel soundmode
