Sony SRS-X2 Quick Start Manual

Also see for SRS-X2: Quick start guide Quick start guide Installation manual Quick start guide Quick start guide

©2014 Sony Corporation Printed in ChinaSRS-X2Personal Audio System Quick Start GuideEnglishManuals suppliedQuick Start Guide (this document)Provides you with instructions on how to connect the unit withBLUETOOTH devices and basic operations.Reference GuideProvides you with precautions and product specifications.Help GuideRead the Help Guide on your computer or smartphone, when you wantto know how to use the unit in greater detail. The Help Guide alsocontains a troubleshooting guide which provides you with remedies forthe problems you might encounter.URL:http://rd1.sony.net/help/speaker/srs‑x2/h_zz/Two-dimensional code:Charging the UnitThis unit has a built-in lithium-ion rechargeable battery. Charge the batterybefore using the unit for the first time.If a plug(s) is(are) included for the USB AC adaptorˎˎ The shape of the USB AC adaptor is different from the illustration. Attach a plug tothe USB AC adaptor before use. If multiple plugs are included, use one which isappropriate to your country/region. Be sure to completely insert the plug into theUSB AC adaptor until it clicks.USB AC adaptor(supplied)DC INLit (orange)Charging starts when the unit that is turned off is connected to an ACoutlet via the supplied USB AC adaptor, and the CHARGE indicator lightsup in orange. Charging is completed in about 3 hours and the indicatorgoes off.Hintˎˎ The unit can be charged while the unit is connected to the supplied USB ACadaptor even when the unit is playing music. (The CHARGE indicator does notlight up.) However, since the charging time may be longer depending on theuse condition, we recommend that the unit is turned off while charging.How to Make Wireless Connection with BLUETOOTHDevicesSelect your case from the 3 pairing types, below. BLUETOOTH devices need to be“paired” with each other beforehand.Pairing and connecting with a BLUETOOTHdeviceThe unit can be paired with up to 4 BLUETOOTH devices. When pairing with twoor more BLUETOOTH devices, perform the following pairing procedure for eachdevice.1 Press the / (power) button to turn on this unit.The / (power) indicator lights up green.The (BLUETOOTH) indicator begins to flash white.Flashing(white)2 Press and hold the (BLUETOOTH) PAIRING button untilbeeps are heard and the (BLUETOOTH) indicator begins toflash white quickly.The unit enters pairing mode.Hintˎˎ When you turn on the unit for the first time, it enters pairing modeautomatically.Fast flashing(white)3 Perform the pairing procedure on the BLUETOOTH device todetect this unit.When a list of detected devices appears on the display of the BLUETOOTHdevice, select “SONY:SRS-X2.”If passkey input is required on the display of a BLUETOOTH device, input“0000.”4 Make the BLUETOOTH connection from the BLUETOOTH device.When the BLUETOOTH connection is established, the (BLUETOOTH)indicator on the unit stays lit.Connecting with a paired BLUETOOTH device1 Turn on this unit.The (BLUETOOTH) indicator begins to flash white.2 Make the BLUETOOTH connection from the BLUETOOTH device.When the BLUETOOTH connection is established, the (BLUETOOTH)indicator on the unit stays lit.Connecting with a smartphone by One-touch (NFC)By touching the unit with a smartphone, the unit proceeds to pairing andBLUETOOTH connection, then turns on automatically after connection isestablished.Compatible smartphonesNFC-compatible smartphones with Android 2.3.3 or later installedNFCNFC (Near Field Communication) is a technology enabling short-range wirelesscommunication between various devices, such as smartphones and IC tags.Thanks to the NFC function, data communication - for example, BLUETOOTHpairing - can be achieved easily by simply touching NFC compatible devicestogether (i.e., at the N-Mark symbol or location designated on each device).1 Set the NFC function of the smartphone to on.For details, refer to the operating instructions supplied with the smartphone.ˎˎ If your smartphone OS is Android 2.3.3 or later, and less than Android 4.1:proceed to step 2.ˎˎ If your smartphone OS is Android 4.1 or later: proceed to step 4.2 Download and install the app “NFC Easy Connect.”“NFC Easy Connect” is a free Android app you can download from GooglePlay.Download the app by searching for “NFC Easy Connect” or access it byusing the following two-dimensional code. Fees may be charged fordownloading the app.To download by the two-dimensional code, use atwo-dimensional code reader app.Noteˎˎ The app may not be available in some countries and/or regions.3 Start “NFC Easy Connect” on the smartphone.Make sure that the app screen is displayed.4 Touch this unit with the smartphone.Unlock the screen of the smartphone beforehand.Keep touching the smartphone on the N marked part of the unit until thesmartphone responds.When the unit is off, if the smartphone touches it and BLUETOOTHconnection is established, then the unit will turn on.Smartphone responds(unit recognized)Follow the on-screen instructions to establish the connection.When the BLUETOOTH connection is established, the (BLUETOOTH)indicator on the unit stays lit.To disconnect, touch the unit with the smartphone again.HintIf you cannot connect the unit, try the following.ˎˎ Start the app on the smartphone, and move the smartphone slowly over the Nmarked part of the unit.ˎˎ If the smartphone is in a case, remove it from the case.ˎˎ Make sure that the app screen is displayed on the smartphone.4-540-487-42(1) Listening and CallingOperate the unit after making BLUETOOTH connection with your BLUETOOTH device.Listening to musicProfile: A2DP, AVRCPStart playback on the BLUETOOTH device, and adjust the volume.Set the volume at an appropriate level on the connected device, and adjust thevolume with the VOL –/+ buttons on the unit.Making a call/Receiving a callProfile: HSP, HFPMicrophoneOperate your smartphone to make a call.To terminate a call, press the button on the unit.Press the button on the unit when an incoming call arrives.Operate in the same way when an incoming call arrives while you are listeningto music.Hintˎˎ When you connect a portable audio device, etc., to the unit’s AUDIO IN jack, the unitturns to AUDIO IN mode automatically. In this case, the sound of the BLUETOOTHdevice is not output. However, the hands-free function is still available.ˎˎ The BLUETOOTH® word mark and logos are owned by the Bluetooth SIG, Inc. and anyuse of such marks by Sony Corporation is under license.ˎˎ The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the UnitedStates and in other countries.ˎˎ Android™ and Google Play™ are trademarks of Google Inc.ˎˎ Other trademarks and trade names are those of their respective owners.Parts and controls Microphone N-markTouch this mark with the smartphone when using One-touch connection (NFC). CHARGE (charge) indicator VOL (volume) –/+ buttons / (power) button/indicator SOUND button/indicatorSets the sound effect. (BLUETOOTH) PAIRING button/indicatorThe indicator lights up or flashes depending on the BLUETOOTH connection.Press and hold this button until beeps are heard, the unit enters pairing mode,and the indicator flashes quickly. (call) button AUDIO IN jackPlays the sound from the device connected by an audio cable (not supplied). RESET (reset) buttonResets the unit. DC IN 5 V jack中⽂（繁體字）隨附的說明書快速⼊⾨指南（本⽂檔）為您提供了將主機和BLUETOOTH裝置連線以及基本操作的說明。參考指南為您提供了注意事項以及產品規格。說明指南如果您想要更詳細地了解使⽤主機的⽅法，請閱讀您電腦或智慧型⼿機的說明指南。說明指南還包含了故障檢查指南，為您提供了可能遇到的問題的解決措施。URL：http://rd1.sony.net/help/speaker/srs-x2/h_zz/⼆維條碼：為主機充電主機內建鋰離⼦充電電池。⾸次使⽤主機前，請先對電池充電。如果USB AC變壓器含插頭 USB AC變壓器的形狀與圖⽰不同。請於使⽤前先將插頭連接⾄USB AC變壓器。如果含多個插頭，請使⽤適合您所在國家/地區的插頭。務必將插頭完全插⼊USB AC變壓器，直⾄其發出喀嗒聲。USB AC變壓器（附帶）DC IN亮起（橘⾊）當關閉的主機透過附帶的USB AC變壓器連接到AC插座時，即可開始充電，且CHARGE指⽰燈亮橘燈。約3⼩時後完成充電，此時指⽰燈將熄滅。要訣 當主機連接到附帶的USB AC變壓器時，即使主機在播放⾳樂，也能為其充電。（CHARGE指⽰燈不亮。）但是，由於充電時間可能會因使⽤狀況⽽變⾧，因此建議在充電時關閉主機。如何與BLUETOOTH裝置建⽴無線連線請依您的情況，從以下的3種配對類型中選擇。BLUETOOTH裝置必須事先彼此“配對”。與BLUETOOTH裝置配對和連線主機最多能與4個BLUETOOTH裝置配對。與兩個或更多個BLUETOOTH裝置配對時，請為每個裝置執⾏下列配對程序。1 按下/（電源）按鈕以開啟主機。/（電源）指⽰燈亮綠燈。（BLUETOOTH）指⽰燈開始閃爍⽩⾊。閃爍（⽩⾊）2 按住（BLUETOOTH） PAIRING按鈕直到聽到嗶聲，⽽且（BLUETOOTH）指⽰燈開始快速閃爍⽩⾊。主機進⼊配對模式。要訣 ⾸次開啟主機時，會⾃動進⼊配對模式。快速閃爍（⽩⾊）3 在BLUETOOTH裝置上執⾏配對程序以偵測主機。BLUETOOTH裝置的顯⽰幕上出現偵測到的裝置清單時，請選擇“SONY:SRS-X2”。如果BLUETOOTH裝置的顯⽰幕上需要輸⼊密碼，請輸⼊“0000”。4 從BLUETOOTH裝置建⽴BLUETOOTH連線。建⽴BLUETOOTH連線之後，主機上的（BLUETOOTH）指⽰燈會持續亮起。連接已配對的BLUETOOTH裝置1 開啟主機。（BLUETOOTH）指⽰燈開始閃爍⽩⾊。2 從BLUETOOTH裝置建⽴BLUETOOTH連線。建⽴BLUETOOTH連線之後，主機上的（BLUETOOTH）指⽰燈會持續亮起。4 從BLUETOOTH裝置建⽴BLUETOOTH連線。建⽴BLUETOOTH連線之後，主機上的（BLUETOOTH）指⽰燈會持續亮起。連接已配對的BLUETOOTH裝置1 開啟主機。（BLUETOOTH）指⽰燈開始閃爍⽩⾊。2 從BLUETOOTH裝置建⽴BLUETOOTH連線。建⽴BLUETOOTH連線之後，主機上的（BLUETOOTH）指⽰燈會持續亮起。以單⼀觸碰功能（NFC）連接智慧型⼿機⽤智慧型⼿機觸碰主機，主機就會進⾏配對與BLUETOOTH連線，然後在建⽴連線之後⾃動開啟。相容的智慧型⼿機已安裝Android 2.3.3或更新版的NFC相容智慧型⼿機NFCNFC（近場通訊）是能在不同裝置之間，例如智慧型⼿機和IC標籤之間，進⾏短距離無線通訊的⼀項技術。拜NFC功能之賜，只要將NFC相容裝置互相觸碰（亦即在每⼀裝置上指定的N標記符號或位置），就能完成資料通訊 - 例如，BLUETOOTH配對。1 將智慧型⼿機的NFC功能設定為開啟。關於詳細資訊，請參閱智慧型⼿機隨附的使⽤說明書。 如果您的智慧型⼿機作業系統是Android 2.3.3或更新版，⽽且低於Android 4.1：請繼續執⾏步驟2。 如果您的智慧型⼿機作業系統是Android 4.1或更新版：請繼續執⾏步驟4。2 下載並安裝應⽤程式“NFC快速連線”。“NFC快速連線”是您可以從Google Play下載的免費Android應⽤程式。請搜尋“NFC快速連線”以下載應⽤程式，或以下列⼆維條碼來存取它。下載應⽤程式可能需要付費。如果要以⼆維條碼下載，請使⽤⼆維條碼讀取器應⽤程式。注意 在某些國家及/或地區可能無法取得應⽤程式。3 啟動智慧型⼿機上的“NFC快速連線”。請確認已顯⽰應⽤程式畫⾯。4 ⽤智慧型⼿機觸碰主機。請事先解除智慧型⼿機螢幕的鎖定。將智慧型⼿機持續觸碰主機的N標記位置，直到智慧型⼿機有反應。在主機關閉時，如果智慧型⼿機觸碰它⽽且建⽴BLUETOOTH連線，主機就會開啟。智慧型⼿機有反應（已識別主機）請按照螢幕上的指⽰操作以建⽴連線。建⽴BLUETOOTH連線之後，主機上的（BLUETOOTH）指⽰燈會持續亮起。如果要中斷連線，請⽤智慧型⼿機再次觸碰主機。要訣如果您無法連接主機，請嘗試下列操作。 啟動智慧型⼿機上的應⽤程式，然後將智慧型⼿機在主機的N標記位置上慢慢移動。 如果智慧型⼿機在保護殼內，請從保護殼中將它取出。 請確認智慧型⼿機上顯⽰應⽤程式畫⾯。聆聽和通話與您的BLUETOOTH裝置建⽴BLUETOOTH連線之後操作主機。聆聽⾳樂設定檔：A2DP、AVRCP在BLUETOOTH裝置上開始播放，然後調整⾳量。將所連接裝置設定為適當的⾳量，然後以主機上的VOL ﹣/﹢按鈕調整⾳量。撥打電話/接聽電話設定檔：HSP、HFP⿆克⾵操作您的智慧型⼿機以撥打電話。如果要終⽌通話，請按下主機上的按鈕。有來電時請按下主機上的按鈕。您正在聆聽⾳樂⽽有來電時，請以相同⽅式操作。要訣 將⾏動⾳訊裝置等連接⾄主機的AUDIO IN插孔時，主機會⾃動切換為AUDIO IN模式。在此狀況下，不會輸出BLUETOOTH裝置的聲⾳。但免持功能仍可⽤。 BLUETOOTH®⽂字標誌和商標為Bluetooth SIG, Inc.所擁有，Sony Corporation對於該標

/ 2

Related manuals for Sony SRS-X2