Sony SRP-X700P Operating Instructions Manual

Also see for SRP-X700P: User manual Interface manual Brochure Operating instructions System integration guide

Contents

3FeaturesThe SRP-X700P is a versatile digital powered mixer thatincorporates an audio mixer, RGB/video switcher, processorand power amplifier in the 3U rack size.Built-in digital mixerThe digital mixer incorporates A/D and D/A converters operating at24 bit/48 kHz sampling and a high-performance DSP. In addition tothe usual functions of conventional ordinary audio mixers, theSRP-X700P offers functions such as a feedback reducer in theindependent channel and automatic mixing by using digitaltechnology.Many audio input/output terminalsSix microphone input systems and two stereo line input systemscan be freely assigned to ten output systems.Support for RGB/Component signalsThe SRP-X700P is equipped with three composite/S video inputsystems and three RGB/component input systems. This broad inputsystem eliminates need for a separate RGB switcher and videoswitcher and enables simple system configuration. The SRP-X700Psupports high-resolution component signals such as 480 p and1080 i, and also supports SXGA 1) (1280 × 1024 pixels) of RGBsignals.Built-in power-saving digital amplifierA power amplifier of 150 W + 150 W (8 Ω) or 200 W + 200W(4 Ω) is incorporated. The rated power consumption is almost halfthat of the conventional amplifier. The SRP-X700P also supportshigh impedance speakers 150 W (70 V LINE, 32 Ω).Support for 5.1-channel audio input4D and 4E INPUT terminals of LINE4 INPUT terminal support5.1-channel audio input.Useful external remote terminal• RS-232C terminalThis terminal enables outside personal computer and systemcontroller to control various operations of the SRP-X700P. Thisterminal can also be used to turn on the power of a Sonyprojector and plasma display, or put it in STANDBY. It also canbe used to select the input signals.• Equipped with Control S output terminalBasic operations (playback, stop, fast forward, rewind, etc.) ofthe Sony AV products are possible.• Equipped with parallel input and output terminalsInput selection, volume control and scene control of the SRP-X700P can be performed in the input terminal. Operation ofenvironment equipment such as screen and lighting, and thestatus display of the SRP-X700P can be performed via the outputterminal.Installation of two systems of 800 MHz bandwireless tuner units WRU-806B (option)Mountable in the EIA standard 19-inch rack(occupying 3U size)Setting up and operating the SRP-X700P using thesupplied softwareThe CD-ROM supplied with the SRP-X700P contains two softwareapplications. One is the User Control Panel that enables an externalpersonal computer to perform basic operations (sound volumeadjustment, input selection and scene control) of the SRP-X700Pand also the basic operations (playback, stop, fast forward, rewind,etc.) of a Sony DVD, VCR, CD and MD. The other is SRP-X700PManager, which enables you to perform internal settings of theSRP-X700P.1) SXGA are registered trade marks of the International Business MachinesCorporation, U.S.A.This unit can be used even without setting the parametersby using the supplied SRP-X700P Manager software.See page 15 for the default parameters when shipped fromthe factory.Features ......................................................................................... 3Location and function of parts .................................................... 4Front panel ................................................................................. 4Rear panel .................................................................................. 6Tuner Unit ................................................................................. 8How to install the tuner unit ................................................. 8How to remove the tuner unit ............................................... 8How to Control the Display from the SRP-X700P .................... 9PROJECTOR CONTROL RS-232C Terminal ........................... 9PROJECTOR CONTROL CONTROL S IN/OUT Terminal ...... 9How to Control the SRP-X700P from External Equipment .... 9REMOTE RS-232C Terminal ................................................... 9REMOTE PARALLEL Terminal ........................................... 10How to Control AV Equipment from the SRP-X700P ............ 11Connecting the Speaker ........................................................... 11System Configuration ................................................................. 12System example when operating the SRP-X700Pwith the default setting when shipped from the factory .......... 12System example when external operation paneland environment equipment are connected ............................. 13System example when operating the SRP-X700Pfrom the REMOTE PARALLEL terminal .............................. 14Default settings ............................................................................ 15Block Diagram ............................................................................ 17Specifications .............................................................................. 18Dimensions .................................................................................. 19Troubleshooting .......................................................................... 20ABOUT SUPPLIED CD-ROMThe supplied CD-ROM contains the two applications SRP-X700PManager and User Control Panel. In addition to the twoapplications, the supplied CD-ROM contains the dedicated USBdriver software, the Control Software Manual and the SRP-X700POperating Instructions.The Control Software Manual and the SRP-X700P OperatingInstructions are supplied as PDF files.To open these files, Adobe Acrobat Reader must be installed intoyour PC.To get Adobe Acrobat Reader, download from www.adobe.comMicrosoft and Windows are registered trademarks of Microsoft Corporation(U.S.A. and other countries).Adobe and Adobe Acrobat Reader are trademarks of the Adobe SystemsIncorporated.Table of Contents