Sony SNC-CH110 User Manual

Also see for IPELA SNC-CH110: Quick reference User guide Installation manual Specifications Specifications

Contents

Administrating the CameraSending Images to FTP Server — FTP Client Menu 61Passive modeSet whether you use the passive mode of FTP server ornot when connecting to the FTP server. Select On toconnect to the FTP server using the passive mode.OK/CancelSee “Buttons common to every menu” on page 23.Alarm sending Tab — Setting theFTP client action when detectingthe alarmSet to forward an image file to a specified FTP serverlinked with alarm detection by the external sensor inputor by the built-in detection functions.NoteWhen more than two of the following settings areactivated, the camera only creates two still images at thesame time. A third still image cannot be created unlessone of the previous two still images is sent.e-Mail (SMTP) menu– Alarm sending tab Alarm sending (when fileattachment is set to On).– Periodical sending Periodical sendingFTP client menu– Alarm sending tab Alarm sending– Periodical sending Periodical sendingTrigger menu– Mail (SMTP)– FTP ClientAlarm sendingSelect On to send the image file to the FTP server linkedwith alarm detection.Remote pathType the path to the destination using up to 64characters.Image file nameType the file name you want to assign to the imageswhen sending to the FTP server. You can use up to 10alphanumeric characters, – (hyphen) and _ (underscore)for naming.SuffixSelect a suffix to be added to the file name.Date & time: The date & time suffix is added to theimage file name.The date/time suffix consists of the year (2 digits),month (2 digits), date (2 digits), hour (2 digits),minute (2 digits) and second (2 digits), andsequential number (2 digits), thus adding a 14-digitnumber to the image file name.Sequence number: A sequential number of 10 digitsbetween 0000000001 and 4294967295 and asequential 2-digit number are added to the image filename.TipA sequential number added to Date & time andSequence number is used to identify individual filescreated with consecutive alarm events.Sequence number clearClick Clear to reset the Sequence number suffix to 1.AlarmSelect the alarm to be linked with the file to beforwarded to the FTP server.Sensor input 1: The external sensor that is connected tosensor input of the camera I/O port.Camera tampering detection: An alarm that istriggered if the camera detects tampering, such asdirection shifting or spray.Motion detection: The alarm detected by the motiondetection function.Click Detection, and the Motion detection menu isdisplayed to allow you to set the motion detectionfunction (page 65).NoteWhen a preset position is set in the menu of PresetPosition-Alarm linked position, the alarm is invalid ifthe camera is moved to a preset position.