Sony RM-NU1 Quick Setup Manual

Also see for HomeShare RMN-U1: Instruction & operation manual Operating instructions Quick setup guide

Contents

4-192-580-11(1)Network Remote Controller RMN-U1Quick Setup Guidefor wireless networksThis Quick Setup Guide explains how to connect this RMN-U1 Network Remote Controller to yourwireless home network, and how to use the functions that can be used over the wireless network.Continued 2Performing initial setup operationsWhen the unit is turned on for the first time after you purchase it, some basic setup operations arerequired.To make the network settings, the access point scan method is introduced in this guide. For details on network connection methods other than the access point scan method: “Connecting the unit to your home network (network settings)” in the Operating InstructionsCheck the following information in advance:You will be required to select or enter the following information when you make the network settings.Check the following information in advance and record it in the spaces provided below.Network name (SSID)*:Security key (WEP key, WPA/WPA2 key)*:* This information should be available from a label on your wireless LAN router/access point, from the operating manual, from theperson who set up your wireless network, or from the information provided by your Internet service provider.1 Turn all the DLNA-compliant devices in your home on.2 Slide the / (power) switch in the direction of the arrow.The language selection screen appears.3 Tap the language you want to select, then tap “OK.”You can select a language from the following languages.Display LanguageEnglish EnglishFrançais FrenchDeutsch GermanItaliano ItalianEspañol Spanish4 Tap “Access Point Scan,” then tap “Next .”The unit automatically starts searching for access points and displays a list of all available accesspoints. The unit can display a maximum of 20 access points in the list.5 Tap the desired access point from the list referring to the memo that youwrote containing the network name (SSID).6 Tap “Next .”The security key input screen appears. If the security key input screen does not appear, proceed tostep 8.7 Tap the text box and enter your security key (WEP Key, WPA/ WPA2 Key) foryour network, then tap “Next .”A confirmation screen appears.For details on how to input characters, refer to “Entering text”in the operating instructions.8 Tap “OK.”“Connection is complete.” appears.9 Tap “Close.”A confirmation screen appears.10 Tap “Close.”The unit starts registering the DLNA-compliant devices that can be recognized over the network,automatically. This may take a while.Tips You can register up to 20 servers and up to 30 renderers (network controlled players) on this unit. Tap “ Refresh” to refresh the HOME screen if the desired device is not registered automatically.©2010 Sony Corporation Printed in ChinaController (this unit)Control other servers and renderers(network controlled players)Home NetworkWireless LAN router/access pointServer (PC, etc.)Stream audio contentRenderer (networkcontrolled player)Play audio content storedon a serverListening to audio content stored on a serverYou can listen to audio content stored on a server (PC, etc) that supports DLNAstandards via your home network.1Before you start using the unit Connecting the AC power adaptorConnect one end of the AC power adaptor to the DC INjack of the remote control charger and the other end to awall outlet. Place the unit on the remote control chargerWhen you place the unit on the remote control charger,the CHG indicator lights up in red and charging starts.The CHG indicator turns off when the unit is fullycharged.Tips DLNA is an abbreviation for Digital Living Network Alliance. It is the name of an organization that establishesguidelines (DLNA guidelines), and it is also the name of the method that allows devices in a house to share digitalcontent (such as music data, image data, etc.) over a home network. The unit complies with the DLNA standard. Youcan listen to music in various ways using the unit together with other DLNA-compliant devices. The battery of this unit is not sufficiently charged when you purchased the unit. Perform the following operation byplacing the unit on the remote control charger. Or perform it after charging the battery fully.

/ 2

Related manuals for Sony HomeShare RMN-U1