32RCD-W50C4) When the display shown in Fig. 3-4 appears, set the Range of alaser power meter to “1 mW” and press “OK”.5) Check that the laser power meter reading satisfies the followingrequirement. When the laser power satisfies the requiredspecification, press “OK”. (Fig. 3-5)LEADER LPM-8001 : 0.76 to 0.86 mW6) When the display shown in Fig. 3-6 appears, set the Range of alaser power meter to “10 mW” and press “OK”.7) Check that the laser power meter reading satisfies the followingrequirement. When the laser power satisfies the requiredspecification, press “OK”. (Fig. 3-7)LEADER LPM-8001 : 4.5 to 4.7 mW8) Check that the laser power meter reading satisfies the followingrequirement. When the laser power satisfies the requiredspecification, press “OK”. (Fig. 3-8)LEADER LPM-8001 : 9.2 to 9.6 mW4 Fig. 3-44 Fig. 3-54 Fig. 3-74 Fig. 3-84 Fig. 3-6