Sony PSP-1001 Instruction Manual

Contents

118 Network Settings8 Check the settings.This screen displays the setting details. Press the left button to return to theprevious screens to correct any of the settings, if necessary.After you have finished entering your settings, press the right button to goto the next screen.9 Save the connection.Press the button to save the connection on your system.10 Test the connection.Before testing the connection, check that the PSP™ system's WLANswitch is turned on.Select "Test Connection", and then press the button. The system willconnect to the selected access point.11 Confirm the connection test results.If the connection is successful, information about the network connectionis displayed. Press the button to end the connection test.Hints• The system will also perform an Internet connection test after connecting to an accesspoint. The results of the Internet connection test will be shown in the connection resultsscreen.• If the connection test fails, follow the on-screen instructions to check the settings.Network settings for the connection can be changed from the options menu( page 119). For additional information, refer to the instructions supplied with thenetwork device and by your Internet service provider.• If the IP address and DNS information will be obtained by a DHCP server, select"Custom" in step 7. Each option will be set to "Automatic".• If you want the browser to start automatically when a connection to an access point isestablished, in step 7 select "Custom", and then set the "Internet Browser" option to"Start". Use this setting if you want to connect to a hotspot that requires a user name andpassword.